The ECAT-251x series are EtherCAT junction slave devices that are specifically designed to aid flexible wiring via branch and daisy chain topologies in industrial EtherCAT applications. These EtherCAT junction devices are equipped with a powerful microcontroller that efficiently manages network traffic and up to six Ethernet ports that aids the communication between the EtherCAT master controller and EtherCAT I/O devices.

Offering a plug-and-play simplicity, the IO5202 series support numerous protocols including Modbus TCP/RTU/ASCII, MQTT, MQTT over TLS and SNMP. By using the intelligent processing and publishing features of the IO5202 series, data can be polled, logged, or even automatically pushed when I/O status changes. Also, data can be pushed to connect and interact with a public or private cloud servers.

The G-4510 series are compact machine-to-machine (M2M) programmable automation controllers (PAC) that are specifically designed for remote monitoring and control applications such as hydrologic/wind monitoring, asset management and tracking system.

The ICP DAS IEC850-211-S allows IEC-61850 MMS clients to access Modbus TCP network as a Modus TCP client. The IEC-61850 communication protocol is specifically designed for intelligent electronic devices at electrical substations. The IEDs exchange information with other IEDs or SCADA via IEC-61850 protocol for protection and control devices.

The ICP DAS PET/ET-7065 are Ethernet remote I/O modules that are equipped with six wet contact digital input channels and six PhotoMOS relay outputs; where each digital input channel can be used as a 32-bit counter. These I/O modules can be remotely controlled via Modbus TCP/UPD protocol over Ethernet network and an ideal solution for SCADA software integration.

The FEMA IE4 is a fully configurable signal converter that allow the measurement of signal in AC or DC voltage with ranges from 0/50mV to 0/600V, AC/DC current from 0/5mA to 0/5A and network frequency input of upto 100Hz and outputs a 4/20mA or 0/10VDC process signal.

The tSH-700 module is a serial port sharers equipped with a number of functions including baud rate Conversion, Modbus RTU/ASCII conversion and Two Masters share One Slave. The built-in web server provides easy configuration interface, and no console commands are required.

The MDC-714i Modbus data concentrator offers Modbus TCP masters the ability to send up to 250 Modbus RTU commands to read/write from/to Modbus slave devices via RS-232/485 interface, and up to 8 Modbus TCP masters are allowed to get the polled data via the Ethernet. The MDC-714i is equipped with an Ethernet port, a single RS-232 port and four RS-485 ports, the RS-485 interface comprised of single non-isolated and three isolated ports.

The tGW-718(i)-T Modbus TCP to RTU/ASCII gateway is a compact, cost effective devices that enables Modbus TCP host to easily communicate with serial Modbus RTU/ASCII devices via Ethernet network; eliminating the cable length limitation of legacy serial devices.

The PMD series are web based intelligent Power Meter Concentrators developed by ICP DAS. The PMD series offer 7″/10.4″ display and a remote web page that can be used to display power information together with interfaces to configure the system settings. These intelligent Power Meters are equipped with vast functions including power data collection, onsite control, power demand management, data logging and alarm notifications.