OKSA Automation Limited offers a broad range of compact signal converters that are designed for a wide range of process automation and control applications.

The FEMA I3 and I4 series of signal converters share a set of features that makes them a powerful tool, which adds great values to any data acquisition solution; especially with the new ‘FORCE’ function for output signal generation.

Being able to generate an output signal without the need of input signal provides a series of advantages both during the construction of the control panels, at start-up, as well as in subsequent revisions and maintenance.

The Bivocom compact IoT cellular routers are equipped with an extensive communication interface such as Ethernet, RS232, RS485, WIFI and GNSS. This IoT routers also support VPN functions such as Point-to-Point Tunneling Protocol, Layer 2 Tunneling Protocol, IP Security, openVPN and Generic Routing Encapsulation protocol. The Modbus RTU/TCP, Modbus TCP/UDP and HTTPs support makes the Bivocom routers ideal for IoT applications such as smart EV chargers, solar powers, power meter readings, IP cameras, vending machines, air compressors and PLC remote controls.

OKSA Automation Limited proudly announce the launch of the liquid leak detection module that directly control triggers and audible alarms in industrial applications. The iSN-104 module can be easily integrated with a variety of monitoring systems to achieve remote alarm and device control function. This liquid leak detection module support DCON and Modbus RTU protocols with different Modbus address configurations for ease of use.

The DL-105x series of intelligent data logger modules are designed to accurately record O2, CO, CO2, HCHO, TVOC, NH3, H2S, temperature, humidity and dew point measurements and store up to 180,000 downloadable records. The DL-105x series supports popular industrial protocols including Modbus, MQTT and ICP DAS proprietary DCON protocol. The DL-105x datalogger can be seamlessly integrated with existing HMI or SCADA systems via communication interfaces such as RS-485, Ethernet, and Power-over-Ethernet (PoE).

The ICP DAS UA-2641M IIoT communication server is equipped with a quad core ARM CPU and two Ethernet ports. This compact powerful IIoT server can function as a data concentrator and IIoT gateway to easily integrate IT and OT system devices, accelerate cloud integration and simplifies the deployment of industrial IoT systems; saving cost and time.

OKSA Automation Limited offers an extensive range of PC based DAQ boards in PCIe and PCI form factors.

Weather your application involves automated test systems or you require a reliable cost effective data acquisition (DAQ) board to perform scientific researches, our vast range of PC based DAQ boards are specially designed to meet your budgetary and application needs. 

Frustrated or perhaps worried about longer lead times on products which delays your projects or productivity and potentially affecting your revenue stream?

There are reliable alternative remote I/O solutions available at OKSA Automation Limited. We have a broad range of remote I/O and protocol converters that support industrial protocols such as Modbus, Profinet, Profibus, BACnet, CAN Bus, EtherCAT, Ethernet/IP and HART with shortest lead- times of 1 – 2 weeks.

OKSA Automation Limited announce the launch of DNP3 Master to Modbus TCP Gateway.

The DNP-211 gateway supports DNP3 master and Modbus UPD/TCP server protocol conversion and can easily connect existing DNP3 network with the Ethernet based master device.

The SG-3037-G triaxial signal conditioner for voltage (accelerometer) output is now available at OKSA.

The ICP DAS SG-3037 triaxial signal conditioner is equipped with 3-channel analog inputs that directly connects to aceleremeter sensors, and then converts the signal measured into analog voltage output.

The ECAT-2016-3 is an EtherCAT I/O module that is equipped with 3 channel analog input with 16-bit resolution that allows direction connection of a resistor bridge. This compact I/O EtherCAT module can be easily integrated with SCADA applications using a daisy chain connection via the dual RJ45 ports and support network topology such as star, line or ring.